AD-1001 FFP2 NR

AD-1001 FFP2 NR

Particles such as those from grinding, sanding, sweeping, sawing, bagging or processing minerals, silica, coal, iron ore, heavy metal, flour, wood, pollen and certain other substances. Liquid or non-oil based particles from sprays that do not also emit oil aerosols or vapors. Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals.

Model: AD-1001
Particulate filtering half mask
EN 149:2001+A1:2009 FFP2 NR
Notified body: Universal (NB2163)
Manufacturer: AnDum Protective Equipment Technology (Changzhou) Co.,Ltd.  
Address: 216, Qianjie, Hengshanqiao Town, Changzhou Economic Zone, Changzhou, Jiangsu Province, China. 213119
Tel: +86-0519-88877118
 
Intend use for:
Particles such as those from grinding, sanding, sweeping, sawing, bagging or processing minerals, silica, coal, iron ore, heavy metal, flour, wood, pollen and certain other substances. Liquid or non-oil based particles from sprays that do not also emit oil aerosols or vapors. Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals.
 
Don’t use for:
Do not use for gases and vapors, oil aerosols, or sandblasting; particulate concentrations that exceed either 10 times the occupational exposure limit or applicable government regulations, whichever is lower. This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5% oxygen.
Do not use as a surgical mask, to provide liquid barrier protection,
Do not use for use in any surgical setting or where significant exposure to liquid, bodily or other hazardous fluids, may be expected
Do not use in a clinical setting where the infection risk level through inhalation exposure is high;
Do not use in the presence of a high intensity heat source or flammable gas,
Do not use for antimicrobial or antiviral protection or related uses or uses for infection prevention or reduction or related uses
 
Specifications:
 
Product Type FFP2
Quantity per Package 50pcs/box
Cartridge or Filter Included Yes
Exhalation Valve No
Faceseal/Nosefoam Nose clip
FDA Cleared Emergency Use Authorization
Features Individually Wrapped, Ear loop
Individually Wrapped Yes
Natural Rubber Latex Components No
Product Model AD-1001
Product Color White
Product Type Dust and other Particles
Recommended Industry General Manufacturing, Marine, Mining, Oil & Gas, Transportation
Respirator Style Flat Fold
Shelf Life 2 Years
Size Standard
Standards/Approvals EN 149:2001+A1:2009
 
Use Limitations and Warnings
Limitation:
Do not use the respirator or enter or stay in a contaminated area under the following circumstances:
a Atmosphere contains less than 19.5% oxygen.
b If you smell or taste contaminant.
c For protection against gases or vapors.
d Contaminants or their concentrations are unknown or immediately dangerous to life or health.
e For sandblasting, paint-spray operations and asbestos treatment.
f In explosive atmospheres.
 
Warning:
1 This mask marked “NR”, shall not be used for more than one shift.
2 Never substitute, modify, add, or omit parts in the configuration as specified by the manufacture.
3 This mask helps protect against certain particulate contaminants but does not completely eliminate exposure to the risk of contracting disease or infection.
4 It is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal.
5 Change the mask immediately if breathing becomes difficult or the mask becomes damaged or distorted.
6 Change the mask if a proper face seal cannot be achieved.
Storage Conditions and Shelf Life
Shelf life of unopened product is 2 years from date of manufacture when stored within temperature range of -5°C to +50°C and at less than 80% relative humidity. This respirator contains no components made from natural rubber latex.
 
 
Fitting Instructions
Must be followed each time respirator is worn.
 
 
 
 
1 Hold the particle filtering half mask in position over the nose and mouth.
2 Pull the earloop behind to ears, attach the earloop to the retaining clip, improve comfort and prevent leakage.
3 Ensure the nose clip is securely moulded around the nose, resting the ends against the cheek to obtain a good seal.
4 To check for proper fit, cup both hands over the mask and exhale vigorously. If air leaks around the nose, tighten the nose clip, if air leaks around the edge, reposition the earloop for better fit.
5 Repeat adjustments until the mask is sealed properly.
6 If a proper seal cannot be achieved do not enter the contaminated area or it may cause illness. Ensure that you hold the clip in place on the earloops while donning and doffing the mask
It is very important to press the nose clip firmly to the nose bridge to form a good seal.